Fusor a granel PUR ¿Cuáles son las precauciones al reemplazar el pegamento?

1.Después de completar elAdhesivo de fusión en caliente PUR, es necesario esperar a queFundición a granel de PURpara arrancar la bomba de engranajes y el motor, y la bomba de engranajes y el motor se generan inmediatamente para formar una bomba de engranajes, reduce la vida útil del fusor a granel PUR

2, when the Fundición a granel de PUR is sorted, it is necessary to detach the hot melt glue heating plate and the PUR hot melt tube, and the PUR hot melt rubber tub is detached from the PUR bulk melter, and should be inside the lifting In the case of pressure, all power is cut off.

3, Fundición a granel de PUR is in the dessert bucket, the incoming air pressure should be subjected to a small to large gradually pressurized, and without the direct use of high pressure gas directly, it is not allowed to prevent the event.

4, when the Fundición a granel de PUR, the operator needs to wear special high-temperature protection clothing, with high temperature gloves, can not contact the skin to contact the hot melt tub, melt PUR hot melt glue, and heat transfer plates Prevent burn.

5. When the Fundición a granel de PUR  is separated from the polyurethane hot melt bucket, the special mechanism of the PUR bulk melter is needed to close the pressure plate and the pump body before consolidating the PUR hot sol satum. Channels to prevent curing.